76 Jumbo Tone Bender
A classic Jumbo 76' Tone Bender. The circuit itself was traced from an original unit, so this thing is very accurate! This is a thick sounding Tone Bender with three knobs.
This kit is an intermediate level build. The PCB is quite a tight one so a steady hand is needed. I've given it a 6/10 difficulty rating.
The PCB hangs from the pots inside the enclosure thus leaving minimal offboard wiring.
This kit is supplied with a JP1590B enclosure.
I Wonder What it Compares to
This kit compares to a classic Jumbo Tonebender.
There is no endorsement or approval from any manufacturer and this information is for comparison only.
Whats Included with Each Option
PCB Only - Just the plain PCB
PCB & Components - PCB, onboard components and any pots and toggle switches.
Full Kit - As above with undrilled enclosure and off board components (foot switch, Jacks, 9v, LED)
Full Kit & Drilling - Full kit with drilled enclosure.
Drilling is an optional extra for the Full Kit. There is a small surcharge for this.
Drilling includes all the holes for a complete pedal.
You will need 3 knobs for this kit. I suggest you get medium sized.
Please be sure to read the build document before you order. The kits are enjoyable but can also be challenging.
You will have to identify components, calculate resistor codes and be able to solder them into place.
All kits require full assembly and any images of completed PCBs are for reference only.